A high rise in pants means that the trousers will hit at a certain point on the body, creating a flattering silhouette. But how do you go about doing this? You may be surprised to find that there are several different ways to do it.
If you’re a modest individual, you may want to stick with the simplest way to make a high rise in pants. Instead of using zippers, you can use buttons and buttons. This is a quick and easy way to create the illusion of a higher waist. However, you will need a good amount of buttons and the right kind.
To begin, you will need a tape measure. Measure the distance from the front to the back of your jeans and make a note of it. Next, measure the crotch seam. It’s a good idea to do this on a flat surface. The reason is that the crotch seam should be able to line up with the side seams of the jeans.
Once you’ve got your measurements, you can decide whether to use a zipper or buttons. If you choose to go the zipper route, you will need to replace the old zipper with a new, longer version. Don’t stitch too close to the zipper. Ideally, the top of the zipper should extend an inch or two above the folded flap of the pants.
If you’re not a seasoned sewer, you may want to enlist the aid of a sewing machine. Use a strong, yet gentle stitch to prevent fraying. Make sure that your machine is working properly. Using a heavy denim layer can cause needles to break.
Once you’ve decided which method you’ll go with, you’ll need to determine how much fabric you’ll need to add. Normally, this can be done by cutting away some of the fabric on the front and back sides of the pants. In the case of a pair of low-rise jeans, you’ll need to cut away a couple of inches.
Next, you’ll need to determine the size of the yoke. This is an important number. Adding more yoke material should be proportional to the additional amount of fabric you’ll need.
If you decide to add a button, make sure that you get a pair of the same type as the original buttons. You can also convert the buttons into a belt loop. Alternatively, you can use a cutoff leg of the jeans to give you the waistline of your dreams.
The best part about doing it yourself is that you can customize your pants to suit your body. However, you’ll need to take some time and measure carefully. Taking accurate measurements is key to making your finished product as good as possible.
There are a few other things to consider. For example, if you’re going to add a button, you may need to sew up the crotch seam of the jeans. You’ll also need to make sure that you match up the seams with the back of the pants.
